AAAC Bare Conductor BS EN50182

AAAC Bare Conductor BS EN50182 ISO9001 & ISO14001 Prompt delivery, direct factory price FREE SAMPLES

AAAC Bare Conductor BS EN50182

1. The features of aluminum alloy power cable

1.1. Power consumption in transit depends on the conductor resistance instead of the resistivity.

1.2. Under the same current capacity, the cross section of aluminum alloy cable is 1.6 times than that of the copper conductor cable.

1.3. Under the same current capacity, the diameter of aluminum alloy conductor is about 1.2 times of copper conductor.

1.4. Under the same equivalent cross section length, the weight of aluminum conductor is 50% of copper conductor.

1.5. Good performance of joint (Owing to the adding of several elements such as iron, magnesium, rare earth to aluminum. 

1.6. Improvement of the mechanical performance 

1.7. High strength: The alloying increases the tensile strength of aluminum alloy.

1.8. Strong elongation: The elongation is above 25%, which greatly improves the bending performance.  

1.9. Small resiliency: The resiliency of aluminum alloy cable is 40% less than that of copper cable, so it is convenient and safe for construction.

1.10. Creep-resisting: The special alloy of aluminum alloy conductor and heat treatment process largely reduce the tendency of mental creep when it is under heat and pressure.  

The sheet showed below is AAAC Bare Conductor Technical Characters Based on Standard BS EN50182  

Code	Old Code	Cross section	No. of wires	Diameter		Mass per unit length	Rated strength	DC resistance at 20°C
				Wire	Conductor
		mm2		mm	mm	kg/km	KN	ohm/km
19-Al3	BOX	18.8	7	1.85	5.55	51.4	5.55	1.7480
24-Al3	ACACIA	23.8	7	2.08	6.24	64.9	7.02	1.3828
30-Al3	ALMOND	30.1	7	2.34	7.02	82.2	8.88	1.0926
35-Al3	CEDAR	35.5	7	2.54	7.62	96.8	10.46	0.9273
42-Al3	DEODAR	42.2	7	2.77	8.31	115.2	12.44	0.7797
48-Al3	FIR	47.8	7	2.95	8.85	130.6	14.11	0.6875
60-Al3	HAZEL	59.9	7	3.30	9.90	163.4	17.66	0.5494
72-Al3	PINE	71.6	7	3.61	10.80	195.6	21.14	0.4591
84-Al3	HOLLY	84.1	7	3.91	11.70	229.5	24.79	0.3913
90-Al3	WILLOW	89.7	7	4.04	12.10	245.0	26.47	0.3665
119-Al3	OAK	118.9	7	4.65	14.00	324.5	35.07	0.2767
151-Al3	MULBERRY	150.9	19	3.18	15.90	414.3	44.52	0.2192
181-Al3	ASH	180.7	19	3.48	17.40	496.1	53.31	0.1830
211-Al3	ELM	211.0	19	3.76	18.80	579.2	62.24	0.1568
239-Al3	POPLAR	239.4	37	2.87	20.10	659.4	70.61	0.1387
303-Al3	SYCAMORE	303.2	37	3.23	22.60	835.2	89.40	0.1095
362-Al3	UPAS	362.1	37	3.53	24.70	997.5	106.82	0.0917
479-Al3	YEW	479.0	37	4.06	28.40	1319.6	141.31	0.0693
498-Al3	TOTARA	498.1	37	4.14	29.00	1372.1	146.93	0.0666
587-Al3	RUBUS	586.9	61	3.50	31.50	1622.0	173.13	0.0567
659-Al3	SORBUS	659.4	61	3.71	33.40	1822.5	194.53	0.0505
821-Al3	ARAUCARIA	821.1	61	4.14	37.30	2269.4	242.24	0.0406
996-Al3	REDWOOD	996.2	61	4.56	41.00	2753.2	293.88	0.0334

AAAC Bare Conductor

 1). Standard: BS 3242, EN50182, ASTM B399, DIN48201,IEC, AS/NZS .

2). Application: AAAC are used in overhead electric power transmission and distribution lines.

3). We can meet customer's special needs.

  

            

AAAC Bare Conductor BS EN50182